Please follow the steps below to complete your installation of NETePay EVO SNAP Host - ESR 5.07.33 Rental

Step 1 - Install Client Control

In order to communicate with this NETePay your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.39
Download

Release date: 11/27/2019

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our PC based POS solutions page.

Release notes for v1.39

  • Support is added for Ingenico Tetra devices for EVO SNAP supporting TDES DUKPT PAN encryption. SecureDevice values are as follows.
    • EMV_LANE3000_EVO_E2E
    • EMV_LANE5000_EVO_E2E
    • EMV_LANE7000_EVO_E2E
    • EMV_LANE8000_EVO_E2E
    • EMV_LINK2500_EVO_E2E
    • EMV_MOVE3500_EVO_E2E
    • EMV_MOVE5000_EVO_E2E
  • Support is added for Ingenico Tetra devices for First Data Rapid Connect supporting both TDES DUKPT and OnGuard PAN encryption. Clear Ingenico Tetra Lane models are also supported for First Data Rapid Connect. SecureDevice values are as follows.
    • EMV_LANE3000_RAPIDCONNECT
    • EMV_LANE5000_RAPIDCONNECT
    • EMV_LANE7000_RAPIDCONNECT
    • EMV_LANE8000_RAPIDCONNECT
    • EMV_LANE3000_RAPIDCONNECT_E2E
    • EMV_LANE5000_RAPIDCONNECT_E2E
    • EMV_LANE7000_RAPIDCONNECT_E2E
    • EMV_LANE8000_RAPIDCONNECT_E2E
    • EMV_LINK2500_RAPIDCONNECT_E2E
    • EMV_MOVE3500_RAPIDCONNECT_E2E
    • EMV_MOVE5000_RAPIDCONNECT_E2E
    • EMV_LANE3000_RAPIDCONNECT_ONGUARD
    • EMV_LANE5000_RAPIDCONNECT_ONGUARD
    • EMV_LANE7000_RAPIDCONNECT_ONGUARD
    • EMV_LANE8000_RAPIDCONNECT_ONGUARD
    • EMV_LINK2500_RAPIDCONNECT_ONGUARD
    • EMV_MOVE3500_RAPIDCONNECT_ONGUARD
    • EMV_MOVE5000_RAPIDCONNECT_ONGUARD
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro

OR

dsiPDCX® 1.65
Download

Release date: 11/27/2019

Datacap’s out-of-scope ActiveX control for NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers.

Release notes for v1.65

  • Support is added for Ingenico Tetra devices for EVO SNAP supporting TDES DUKPT PAN encryption. SecureDevice values are as follows.
    • INGENICOLANE3000_EVO_E2E
    • INGENICOLANE5000_EVO_E2E
    • INGENICOLANE7000_EVO_E2E
    • INGENICOLANE8000_EVO_E2E
    • INGENICOMOVE3500_EVO_E2E
    • INGENICOMOVE5000_EVO_E2E
    • INGENICOLINK2500_EVO_E2E
  • Support is added for Ingenico Tetra devices for First Data Rapid Connect supporting both TDES DUKPT and OnGuard PAN encryption. SecureDevice values are as follows.
    • INGENICOLANE3000_RAPIDCONNECT_E2E
    • INGENICOLANE5000_RAPIDCONNECT_E2E
    • INGENICOLANE7000_RAPIDCONNECT_E2E
    • INGENICOLANE8000_RAPIDCONNECT_E2E
    • INGENICOMOVE3500_RAPIDCONNECT_E2E
    • INGENICOMOVE5000_RAPIDCONNECT_E2E
    • INGENICOLINK2500_RAPIDCONNECT_E2E
    • INGENICOLANE3000_RAPIDCONNECT_ONGUARD
    • INGENICOLANE5000_RAPIDCONNECT_ONGUARD
    • INGENICOLANE7000_RAPIDCONNECT_ONGUARD
    • INGENICOLANE8000_RAPIDCONNECT_ONGUARD
    • INGENICOMOVE3500_RAPIDCONNECT_ONGUARD
    • INGENICOMOVE5000_RAPIDCONNECT_ONGUARD
    • INGENICOLINK2500_RAPIDCONNECT_ONGUARD
  • The PIN entry command is fixed for EBT transactions using Ingenico Voltage PAN encryption.
  • For Ingenico Onguard PAN encryption, the parsing of clear card data has been modified. Clear card data is returned by the device configured for OnGuard PAN encryption if the card account number matches the current whitelist.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro

OR

DSIClientX® 3.86
Download

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software.

Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro
Step 2 - Install Administrative tools (optional)
Local Batch Report Viewer
Download User Guide

Release date: 06/12/2018

Local Batch Report Viewer can be used to view the locally stored batch report of Host based NETePay who support support this feature and have it enabled via PSCS.

Release notes for v1.01

  • Declined/Error tab added. If supported by NETePay details about transactions which received a decline or error response will be displayed when local batch reporting is enabled.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro
Step 3 - Install NETePay EVO SNAP Host - ESR 5.07.33 Rental
Install
NETePay 5
Director

OR

Download User Guide

This NETePay is available via the NETePay 5 Director which provides a simplified installation process and go-forward automatic software updates. NETePay 5 Director is recommended but if needed the classic installation process is still available by clicking Download as usual.

To learn more about the NETePay 5 Director click here.

Release date: 11/15/2019

  • Support is added for the AdjustByRecordNo TranCode allowing a TIP to be added after an original Sale transaction. EVO does not allow the Purchase amount to be adjusted. Also, once a transaction is adjusted, it cannot be voided. EVO expects to fix this issue with voiding sometime in January.
  • Currently, EVO does not support the BatchSummary function. For this reason, NETePay returns all zeroes for the BatchSummary response fields (BatchNo, BatchItemCount, NetBatchTotal). This does not prevent the BatchClose function from working properly. EVO expects to support the BatchSummary function sometime next year.
  • The following features are now supported, but cannot be used until the Ingenico Tetra devices are available – Debit, EBT, Online PIN on Credit, and EMV Contactless.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro (Windows XP and Vista do not support TLS 1.2 which is now an industry requirement)