Please follow the steps below to complete your installation of NETePay FDMS Rapid Connect Host EMV - RRH 5.07.34 Rental

Step 1 - Install Client Control

In order to communicate with this NETePay your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.75
Download

Release date: 12/05/2023

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.75

  • Support is added for Pax A800 devices. This device is similar to the Pax A920PRO except that the MSR is on the side rather than the top. New SecureDevice values are below.
    • EMV_A800_PAYMENTECH
    • EMV_A800_VANTIV_E2E
    • EMV_A800_TSYS
    • EMV_A800_TSYS_VOLT
    • EMV_A800_RAPIDCONNECT
    • EMV_A800_RAPIDCONNECT_E2E
    • EMV_A800_HEARTLAND
    • EMV_A800_DATACAP
    • EMV_A800_DATACAP_BLUEFIN
    • EMV_A800_EVO
  • Support is added for the IDTech VP3350. The VP3350 supports tap, chip and swipe, credit only. This release supports the VP3350 with the Datacap TDES PAN key. The new SecureDevice value is below.
    • EMV_VP3350_DATACAP_E2E
    • For Verifone P400 devices, this version explicitly disables the U01 command – external AID selection. The next version will enable the U01 command. This will allow an ISV to move back to this version if there is an issue with the U01 command in next release.
Microsoft Windows 11 Pro / 10 Pro / Server 2019 / Server 2016

OR

dsiPDCX® 1.90
Download

Release date: 12/05/2023

Datacap’s out-of-scope ActiveX control for NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers.

Release notes for v1.90

  • Support is added for Pax A800 devices. The A800 is similar to the A920PRO except that the MSR is on the side rather than the top. The PAX devices support Credit, Debit, EBT and PrePaid. New SecureDevice values are below.
    • PAXA800
    • PAXA800_DATACAP_E2E
    • PAXA800_DATACAP_BLUEFIN
    • PAXA800_VANTIV_E2E
    • PAXA800_EVO_E2E
    • PAXA800_RAPIDCONNECT_E2E
    • PAXA800_TSYS_VOLT
    • PAXA800_HEARTLAND_VOLT
  • Support is added for the IDTech VP3350. This release supports the VP3350 with the Datacap TDES PAN encryption. The VP3350 supports swipe, Credit and PrePaid only. It supports GetPrePaidStripe and GetPrePaidStripeAllTracks, but it does not load a whitelist. The new SecureDevice value is below.
    • IDTVP3350_DATACAP_E2E
  • For Pax MSR read failures, retry logic is added.
  • For Verifone P400, keyed clear EBT account numbers are allowed even when a device in encrypted. Swiped clear EBT account numbers are also allowed when a device is encrypted.
  • For Ingenico Lane/8000 clear device, the value is fixed for SecureDeviceInit. Earlier versions returned Invalid Pad Type.
Microsoft Windows 11 Pro / 10 Pro / Server 2019 / Server 2016

OR

DSIClientX® 3.86
Download

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software.

Microsoft Windows 11 Pro / 10 Pro / Server 2019 / Server 2016
Step 2 - Install Administrative tools (optional)
Local Batch Report Viewer
Download User Guide

Release date: 05/11/2020

Local Batch Report Viewer can be used to view the locally stored batch report of Host based NETePay who support support this feature and have it enabled via PSCS.

Release notes for v1.03

  • Fix for an issue which prevented errors from the open batch being shown in the decline/error tab.
Microsoft Windows 11 Pro / 10 Pro / Server 2019 / Server 2016
Step 3 - Install NETePay FDMS Rapid Connect Host EMV - RRH 5.07.34 Rental
Install
NETePay 5
Director

OR

Download User Guide

This NETePay is available via the NETePay 5 Director which provides a simplified installation process and go-forward automatic software updates. NETePay 5 Director is recommended but if needed the classic installation process is still available by clicking Download as usual.

To learn more about the NETePay 5 Director click here.

Release date: 10/10/2019

  • A recent EMV brand certification has been completed for Ingenico Telium devices. New for this certification is support for EMV contactless. With Ingenico Telium devices, Visa and Mastercard contactless is EMV only. Amex and Discover contactless is both MSD and EMV.
  • First Data’s Validated P2PE is supported using Ingenico’s OnGuard PAN encryption. This NETePay supports Ingenico Telium devices configured for either TDES DUKPT or OnGuard PAN encryption. OnGuard is required for First Data’s Validated P2PE. NETePay still supports devices without PAN encryption. This includes the Verifone Vx805 and Ingenico Telium devices.
  • For EBT eWIC transactions, the TxnAmt field returned by Rapid Connect is now returned as the authorized amount.
  • Rapid Connect recently added support for a POSID field to allow the point of entry to be identified uniquely. The LaneID field is now sent to Rapid Connect in this field. The POSID field is up to 4 characters.

New build released 10/24/19 - Update to SAF library 7.0. This fixes a critical stop error which can occur where a forward contains a voided transaction with more than 1 child. This also corrects an issue where transactions may go online even though ForceOffline is set to "Y".

Microsoft Windows 11 Pro / 10 Pro / Server 2019 / Server 2016