Please follow the steps below to complete your installation of NETePay Paymentech Host EMV - PNH 5.07.33

Step 1 - Install Client Control

In order to communicate with this NETePay your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.56

Release date: 11/30/2021

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.56

  • Support is added for the following IDTech devices.
    • Augusta for First Data Rapid Connect with TDES DUKPT PAN encryption.
    • SecureHead MSR for First Data Rapid Connect with TDES DUKPT PAN encryption.
    • VP3300 for First Data Rapid Connect with TDES DUKPT PAN encryption.
    • VP8300 for First Data Rapid Connect with TDES DUKPT PAN encryption.
  • A specific Secure Device value is now exposed for the Verifone Vx805 for Mercury running XPI version 12. This is done as part of the device restructuring within dsiEMVUS. The Secure Device value is EMV_VX805_12_MERCURY. The Secure Device value EMV_VX805_MERCURY can still be used for a Vx805 running XPI 8.42b or XPI 12 for Mercury (Worldpay IP).
  • The IDTech VP3300 Cancel request XML response message is fixed.
  • IDTech VP3300 contactless setting changes are included specific to Mastercard PayPass.
  • A new XML field <DirectMktInvoiceNo> is supported. This field is used specifically for Portico Heartland/Global U.S. NETePay as a way to send an Invoice number that is used for Heartland/Global reporting.
  • For Ingenico IP communication, a 200 millisecond delay has been added after a socket close before a new socket connection.
  • For Ingenico devices, the client now looks for a new form called AMTVEX.K3Z. If it finds this new form, then it uses it rather than form AMTV.K3Z. This new form allows the physical enter button to be pressed during amount acknowledgement. The plan is to load this new form using the PIN pad Field Loader or PIN pad loader for distribution.
  • For Ingenico devices, the client now returns a cancel response if a chip card is removed during external AID selection.
  • For Ingenico Tetra devices, a new parameter for setting the mask for contactless card types supported (0008,0023) is set to "1" (Payment Card only). This disables any MiFare card tap.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro

OR

dsiPDCX® 1.76

Release date: 11/30/2021

Datacap’s out-of-scope ActiveX control for NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers.

Release notes for v1.76

  • Support is added for the following IDTech devices.
    • IDTech Augusta for First Data Rapid Connect with TDES DUKPT PAN encryption.
    • IDTech SecureHead MSR for First Data Rapid Connect with TDES DUKPT PAN encryption.
    • IDTech VP3300 for First Data Rapid Connect with TDES DUKPT PAN encryption.
    • IDTech VP8300 for First Data Rapid Connect with TDES DUKPT PAN encryption.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro

OR

DSIClientX® 3.86

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software.

Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro
Step 2 - Install Administrative tools (optional)
Local Batch Report Viewer

Release date: 05/11/2020

Local Batch Report Viewer can be used to view the locally stored batch report of Host based NETePay who support support this feature and have it enabled via PSCS.

Release notes for v1.03

  • Fix for an issue which prevented errors from the open batch being shown in the decline/error tab.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro
Step 3 - Install NETePay Paymentech Host EMV - PNH 5.07.33

This NETePay is available via the NETePay 5 Director which provides a simplified installation process and go-forward automatic software updates. NETePay 5 Director is recommended but if needed the classic installation process is still available by clicking Download as usual.

To learn more about the NETePay 5 Director click here.

Release date: 02/08/2019

  • An EMV card brand certification was completed for Ingenico Tetra devices. These include the Lane/3000, 5000, 7000 and 8000. It also includes the Move/3500, Move/5000 and Link/2500. The latest client controls (dsiPDCX and dsiEMVUS) support these devices with clear card data and with Ingenico OnGuard card data encryption.
  • The EMV Support parameter now includes a choice for “Credit and Debit – Prefer Debit”. This feature pertains to Ingenico devices. If a card is inserted that includes a US Common Debit AID, that AID is preferred over any other AID on the card and is used for the transaction. The card would typically require a valid PIN for an approval.
  • Support is added for “81” China Union Pay cards. The latest BIN range for China Union Pay cards is used at this version.
  • Support is added for China Union Pay EMV for contact and contactless.
  • Support is added for Local Batch Inquiry.

New build released 12/11/19 - Invalid length Track2 supported for EBT.

Microsoft Windows 10 Pro / 8 Pro / 7 Pro (Windows XP and Vista do not support TLS 1.2 which is now an industry requirement)