Please follow the steps below to complete your installation of NETePay FlexPoint Host EMV - VRH 5.07.32 Rental

Step 1 - Install Client Control

In order to communicate with this NETePay your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.31

Release date: 04/19/2019

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our PC based POS solutions page.

Release notes for v1.31

  • For Ingenico devices (except the iSC250 and iSC480), during an EMV ParamDownload, the delay time for a Contactless event is set to 2.5 seconds. This is used to prevent a Contactless read from occurring when attempting an MSR swipe with a Contactless card.
  • For Ingenico devices, if EMV Contactless is enabled, MSD Contactless is disabled for Visa and Mastercard. This applies only to configurations where the NETePay supports EMV Contactless processing and “Contactless Support” is set to “EMV”. For configurations where only MSD Contactless is supported, MSD Contactless is still enabled for all card types.
  • For Ingenico Telium devices, if a PadReset is performed with a card inserted, the device automatically displays “Please remove card” and beeps. Tetra devices do not automatically display “Please remove card” and beep. For this reason, dsiEMVUS now sends the “Please remove card” message and beep message to Tetra devices during a PadReset if a card is inserted. The PadReset command will not wait forever for the card to be removed. If the PadReset times out with the card still inserted, the pad will be reset again which will display “Welcome”.
  • For Ingenico Telium devices, support is added for Ingenico’s “Terms and Conditions” form. This does not currently work on Tetra devices.
  • For Ingenico devices, support is added for Parking IN/OUT using customer data provided on the way IN and the way OUT to allow a Parking system to determine the parking rate and charge the customer.
  • Support is added for Ingenico Telium and Tetra devices for Datacap to be used with a Datacap TDES DUKPT key processing through Datacap’s hosted NETePays. Devices include the iSC250, iPP350, iPP320, iCMP, iUC285, iSC480, iUP250, iSMP4, iWL258, Lane/3000, Lane/5000, Lane/7000, Lane/8000, Link/2500, Move/3500 and Move/5000. Support is also added for Telium devices for Datacap for validated P2PE. These devices use Ingenico OnGuard encryption where the PAN data is decrypted via Bluefin when processing through Datacap’s hosted NETePays. Devices include the iSC250, iPP320, iUC285 and iSMP4. New SecureDevice IDs are as follows.
  • All XML fields required for Admin functions BatchReportQuery and BatchReportTransaction now pass through dsiEMVUS to a NETePay.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro


dsiPDCX® 1.59

Release date: 02/20/2019

Datacap’s out-of-scope ActiveX control for NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers.

Release notes for v1.59

  • Support is added for the following Ingenico Telium and Tetra devices for Datacap using a Datacap TDES DUKPT PAN encryption key.
    • iSC250
    • iPP320
    • iPP350
    • iCMP
    • iSC480
    • iSMP4
    • Lane/3000
    • Lane/5000
    • Lane/7000
    • Lane/8000
    • Move/3500
    • Move/5000
    • Link/2500
  • Support is added for the following Ingenico Telium devices for Datacap when using OnGuard Validated P2PE via Bluefin.
    • iSC250
    • iPP320
    • iPP350
    • iCMP
  • Support is completed for the Verifone Vx805 running XPI 12 for Worldpay IP (Mercury). The version of XPI is 12.11.38. This XPI version supports TDES DUKPT data variant E2EE. There is no new SecureDevice value for this device. The same value is used whether using XPI 8.42b or XPI 12.11.38 (VX805XPI_MERCURY_E2E). dsiPDCX automatically determines the XPI version and adjusts accordingly.
  • Support is added for Worldpay IP VAS gift card on the Verifone P400. This includes support for a new EncryptedFormat with a value of MercuryAppleGift. The Mercury MM GIFTePay requires changes to support this new Encrypted Format.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro


DSIClientX® 3.86

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software.

Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro
Step 2 - Install Administrative tools (optional)
Local Batch Report Viewer

Release date: 06/12/2018

Local Batch Report Viewer can be used to view the locally stored batch report of Host based NETePay who support support this feature and have it enabled via PSCS.

Release notes for v1.01

  • Declined/Error tab added. If supported by NETePay details about transactions which received a decline or error response will be displayed when local batch reporting is enabled.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro
Step 3 - Install NETePay FlexPoint Host EMV - VRH 5.07.32 Rental

This NETePay is available via the NETePay 5 Director which provides a simplified installation process and go-forward automatic software updates. NETePay 5 Director is recommended but if needed the classic installation process is still available by clicking Download as usual.

To learn more about the NETePay 5 Director click here.

Release date: 02/08/2019

  • An EMV card brand certification was completed for Ingenico Tetra devices. These include the Lane/3000, 5000, 7000 and 8000. It also includes the Move/3500, Move/5000 and Link/2500. The latest client controls (dsiPDCX and dsiEMVUS) support these devices with clear card data and with Ingenico Voltage card data encryption.
  • The EMV Support parameter now includes a choice for “Credit and Debit – Prefer Debit”. This feature pertains to Ingenico device. If a card is inserted that includes a US Common Debit AID, that AID is preferred over any other AID on the card and is used for the transaction. The card would typically require a valid PIN for an approval.
  • Support is added for “81” China Union Pay cards. The latest BIN range for China Union Pay cards is used at this version.
  • Support is add for EMV contactless for Ingenico devices.
  • Support is added for Incremental Authorization and Partial Reversal. The normal flow for a bar tab using these transactions would be to start with a PreAuth, then perform one or more Incremental Authorizations and finally perform one Partial Reversal so that the exact amount authorized is settled. The final step would be to perform a PreAuthCapture for the settlement amount. This would be the flow for Worldpay IP (Mercury) or Heartland. For TSYS, PreAuth and PreAuthCapture are not supported. For TSYS, the ISV must start with a Sale. The next step is to perform one or more Incremental Authorizations. Finally, perform one Partial Reversal so that the exact amount authorized is settled. The Sale is already captured, so the final amount will settle.
  • Support is added for a amount field. For TSYS, this field is informational only. It applies to Visa, Mastercard and Discover.
  • Support is added for Local Batch Inquiry.
  • Support is added for ReturnByRecordNo.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro (Windows XP and Vista do not support TLS 1.2 which is now an industry requirement)