Please follow the steps below to complete your installation of NETePay Paymentech Host EMV - PNH 5.06.17

Step 1 - Install Client Control

In order to communicate with this NETePay your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.56

Release date: 11/30/2021

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.56

  • Support is added for the following IDTech devices.
    • Augusta for First Data Rapid Connect with TDES DUKPT PAN encryption.
    • SecureHead MSR for First Data Rapid Connect with TDES DUKPT PAN encryption.
    • VP3300 for First Data Rapid Connect with TDES DUKPT PAN encryption.
    • VP8300 for First Data Rapid Connect with TDES DUKPT PAN encryption.
  • A specific Secure Device value is now exposed for the Verifone Vx805 for Mercury running XPI version 12. This is done as part of the device restructuring within dsiEMVUS. The Secure Device value is EMV_VX805_12_MERCURY. The Secure Device value EMV_VX805_MERCURY can still be used for a Vx805 running XPI 8.42b or XPI 12 for Mercury (Worldpay IP).
  • The IDTech VP3300 Cancel request XML response message is fixed.
  • IDTech VP3300 contactless setting changes are included specific to Mastercard PayPass.
  • A new XML field <DirectMktInvoiceNo> is supported. This field is used specifically for Portico Heartland/Global U.S. NETePay as a way to send an Invoice number that is used for Heartland/Global reporting.
  • For Ingenico IP communication, a 200 millisecond delay has been added after a socket close before a new socket connection.
  • For Ingenico devices, the client now looks for a new form called AMTVEX.K3Z. If it finds this new form, then it uses it rather than form AMTV.K3Z. This new form allows the physical enter button to be pressed during amount acknowledgement. The plan is to load this new form using the PIN pad Field Loader or PIN pad loader for distribution.
  • For Ingenico devices, the client now returns a cancel response if a chip card is removed during external AID selection.
  • For Ingenico Tetra devices, a new parameter for setting the mask for contactless card types supported (0008,0023) is set to "1" (Payment Card only). This disables any MiFare card tap.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro

OR

dsiPDCX® 1.76

Release date: 11/30/2021

Datacap’s out-of-scope ActiveX control for NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers.

Release notes for v1.76

  • Support is added for the following IDTech devices.
    • IDTech Augusta for First Data Rapid Connect with TDES DUKPT PAN encryption.
    • IDTech SecureHead MSR for First Data Rapid Connect with TDES DUKPT PAN encryption.
    • IDTech VP3300 for First Data Rapid Connect with TDES DUKPT PAN encryption.
    • IDTech VP8300 for First Data Rapid Connect with TDES DUKPT PAN encryption.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro

OR

DSIClientX® 3.86

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software.

Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro
Step 2 - Install NETePay Paymentech Host EMV - PNH 5.06.17

This NETePay is available via the NETePay 5 Director which provides a simplified installation process and go-forward automatic software updates. NETePay 5 Director is recommended but if needed the classic installation process is still available by clicking Download as usual.

To learn more about the NETePay 5 Director click here.

Release date: 06/04/2018

  • EMV Support certied for Ingenico Telium 2 devices using RBA 21.0.2 (kernel 0526) which includes...
    • EMV Debit
    • EMV Contactless
    • EMV Unattended (Ingenico iUC285 and iSelf)
  • Support added for Safetech (OnGuard) E2EE - Requires dsiPDCX v1.52 and/or dsiEMVUS v1.24
  • Support added for Safetech multi-use tokenization
  • A new "Contactless Support" parameter is added that can be set to "MSD" or "EMV". This parameter will determine how an Ingenico device is loaded for contactless payments and whether or not EMV contactless payments are supported. When using a Verifone Vx805 PIN pad, this parameter should be set to "MSD".

New build released 6/21/18 - Correction to padding of purchase card data when AVS zip is not present which resolves "INV PROCARD LEN 327" error.

Microsoft Windows 10 Pro / 8 Pro / 7 Pro (Windows XP and Vista do not support TLS 1.2 which is now an industry requirement)