Please follow the steps below to complete your installation of NETePay Heartland Portico Host EMV - HRH 5.07.20 Rental

Step 1 - Install Client Control

In order to communicate with this NETePay your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.52

Release date: 02/12/2021

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our PC based POS solutions page.

Release notes for v1.52

  • Support is added for the Verifone P400 PIN pad for Datacap Hosted with Bluefin Validated P2PE. The new SecureDevice values for this configuration is "EMV_P400_DATACAP_BLUEFIN"
  • Fix for First Data P400 with TDES PAN Encryption for keyed CVV Data. The CVV Data is now a clear value sent to First Data Rapid Connect.
  • Support is added to return a clear expiration date. An ISV can request the return of clear expiration date information by sending <ReturnClearExpDate>Allow</ReturnClearExpDate> in any transaction request. The XML response will then include these two fields - <ExpDataMonth> and <ExpDateYear>. Example … <ExpDateMonth>12</ExpDateMonth> <ExpDateYear>25</ExpDateYear>
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro

OR

dsiPDCX® 1.72

Release date: 02/12/2021

Datacap’s out-of-scope ActiveX control for NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers.

Release notes for v1.72

  • Support is added for the Verifone P400 PIN pad for Datacap Hosted with Bluefin Validated P2PE. The new SecureDevice values for this configuration is "VERIFONEP400_DATACAP_BLUEFIN"
  • Fix for First Data P400 with TDES PAN Encryption for keyed CVV Data. The CVV Data is now a clear value sent to First Data Rapid Connect.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro

OR

DSIClientX® 3.86

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software.

Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro
Step 2 - Install Administrative tools (optional)
Local Batch Report Viewer

Release date: 05/11/2020

Local Batch Report Viewer can be used to view the locally stored batch report of Host based NETePay who support support this feature and have it enabled via PSCS.

Release notes for v1.03

  • Fix for an issue which prevented errors from the open batch being shown in the decline/error tab.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro
Step 3 - Install NETePay Heartland Portico Host EMV - HRH 5.07.20 Rental

Release date: 12/11/2017

  • PA-DSS 3.2
  • Support is added for IDTech devices with AES DUKPT P2PE.
  • Store and Forward is added. This is an optional feature that must be enabled via PSCS and requires integration changes.
  • Pay At The Table is added. This is an optional feature that must be enabled via PSCS and requires integration changes.
  • Local Batch Reporting data storage is added. This is an optional feature that must be enabled via PSCS. Data can be viewed using the Local Batch Report Viewer.
  • Support is added for the latest Auto-Update functionality. With 5.07.20, updates can occur to new versions of the same application.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro (Windows XP and Vista do not support TLS 1.2 which is now an industry requirement)