Please follow the steps below to complete your installation of NETePay EVO US EMV (TS) Host - VRH 5.07.20 Rental

Step 1 - Install Client Control

In order to communicate with this NETePay your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.50

Release date: 11/18/2020

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our PC based POS solutions page.

Release notes for v1.50

  • For the Verifone P400, the card removal timeout is extended from 15 seconds to 45 seconds to alleviate a lock-up issue.
  • Demand Credit is supported for EMV transactions. If the <CardType> is sent in with a value of "Credit", then any EMV transaction requires one of the supported credit AIDs to be selected by the cardholder. If the cardholder selects a Debit AID, then dsiEMVUS will return the error "Credit required and not presented".
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro

OR

dsiPDCX® 1.70

Release date: 08/28/2020

Datacap’s out-of-scope ActiveX control for NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers.

Release notes for v1.70

  • Support is added for a new command called GetPrePaidStripeTk1 used to return Track1 card data as long as the card number is not a major credit card.
  • Support is added for the Verifone M400 for Worldpay IP (Mercury) with 3DES DUKPT PAN encryption.
  • Support is added for the Verifone M400 for the NETePay Hosted environment with 3DES DUKPT PAN encryption.
  • Support is added for the Verifone M400 for First Data Rapid Connect with 3DES DUKPT PAN encryption.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro

OR

DSIClientX® 3.86

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software.

Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro
Step 2 - Install Administrative tools (optional)
Local Batch Report Viewer

Release date: 05/11/2020

Local Batch Report Viewer can be used to view the locally stored batch report of Host based NETePay who support support this feature and have it enabled via PSCS.

Release notes for v1.03

  • Fix for an issue which prevented errors from the open batch being shown in the decline/error tab.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro / Vista Pro / XP Pro
Step 3 - Install NETePay EVO US EMV (TS) Host - VRH 5.07.20 Rental

Release date: 10/25/2017

  • PA-DSS 3.2
  • Support for Ingenico EMV unattended devices is added. This includes the iUC285 and iUP250 devices.
  • Store and Forward is added. This is an optional feature that must be enabled via PSCS and requires integration changes.
  • Local Batch Reporting data storage is added. This is an optional feature that must be enabled via PSCS. Data can be viewed using the Local Batch Report Viewer.
  • Suport for Auto-Updates.
  • For SaleByRecordNo transactions, the value of the <A32< Moto/eCommerce indicator is now "7" for eCommerce or "1" otherwise. For previous versions,the value was a space when not eCommerce.
Microsoft Windows 10 Pro / 8 Pro / 7 Pro (Windows XP and Vista do not support TLS 1.2 which is now an industry requirement)